Categories
Fire Arms

Last 10 shot group for an old factory barrel.

I went out to the range today to finish off the last of my loaded ammo. I want to make sure all my brass is clean and prepared for when the new barrel is installed. After 4500 rounds down the tube, this barrel is still capable of a 3/4 MOA grouping at 100 meters in winds that were gusting from 10-15 mph. The single hole that is far left was all me. On shot 5, I bumped the table due to a wind gust right as I was squeezing off the round. The group should actually be tighter than shown. Human error is always the biggest problem.